Henan Yu Gong High Frequency Machine Co.,LtdHenan Yu Gong High Frequency Machine Co.,Ltd
CONTACT US
Fax: 180423133
Tel: 0371-8377828
E-MAIL: service@fangshenqicaiw.com

Frequency welding machine high frequency welder spark phenomenon and treatment methods

Wuxi Golden high frequency equipment co detailed frequency welding machine high frequency welder spark in the treatment
gaozhouboji heat welded PVC plastic material for sparking phenomenon?
1, first of all to understand the working principle of high-frequency.
2, understand high frequency equipment for heat welding.
3, understanding how striking phenomenon in a high frequency equipment in the process.
4, high-frequency equipment in use how to prevent arcing phenomena in the process.
1 "we must first understand the working principle of high-frequency.
   the working principle of high-frequency equipment: is the use of high-frequency device high voltage rectifier high frequency stimulation tube oscillation transient high frequency current, used in the processing of plastic materials in high-frequency electric field of instant polarity change, coupled with a certain amount of pressure will be able to achieve the objective of completely dissolved.
2 "understanding thermal welding of high frequency equipment for that kind of material.
  according to the principle of high frequency equipment characteristics of high frequency equipment mainly used in PVC, TPU, EVA, PETG, APET plastics material or contain any processing of mixed materials can be welded 20%PVC.
3 "learn how striking phenomenon in a high frequency equipment in the process.
   high frequency devices used in the process sparking now you should use appropriate treatment for high-frequency ignition of dust processing shall use alcohol, bananas, water, gasoline and other liquids used cotton cloth clean fire place for use again, if affinity materials for high frequency machine brand new combination of materials should be replaced.
4 "high frequency devices used in the process to prevent sparking.
high frequency devices used in the process should be taken to reduce arcing.
4.1 high-frequency currents should be adjusted according to the actual
4.2 high-frequency equipment in appropriate high-frequency current levels before installing the die molds should be adjusted.
4.3 high-frequency welding products equipment in pressure when appropriate.
4.4 high frequency devices should be installed above United States 5557 anti-firing system.
high frequency machine causes arcing equipment:
1, high frequency mould does not adjust level prior to use.
2, high frequency device current is too large. ,
3, in heat welding pressure regulator enough power.
4, die before far did not handle well.

 

BACK